Product Advantages:
Pure sine wave
Built-in MPPT solar charge controlller
Configurable solar input voltage up to 500V Maximum
Configurable input voltage range for home appliances and personal computers via LCD setting
Configurable battery charging current based on applications via LCD setting
Configurable AC/Solar Charger priority via LCD setting
Compatible to mains voltage or generator power
Auto restart while AC or Solar is recovering
Capable working without battery connection
Capable suppling power to AC output with solar and utility at same time
Capable suppling AC output with solar input only
Overload/ Over temperature/ short circuit protection
Parallel operation with up to 12 units only available for 5KW model
Triple dust filter
Data Sheet
| Model | FL-IVEM5048 | |||||||||
| Rated power | 5KVA/5000W | |||||||||
| Input | ||||||||||
| Voltage | 230V | |||||||||
| Selectable Voltage Range | 170-280 VAC ( ) 90-280 VAC ( Appliances ) | |||||||||
| Frequency Range | 50 Hz/60 Hz (Auto sensing) | |||||||||
| Battery Voltage | 48VDC | |||||||||
| Output | ||||||||||
| AC Voltage Regulation | 230VAC ± 5% | |||||||||
| Efficiency(Peak) | >95% ( Rated R load, battery full charged ) | |||||||||
| Transfer time | 10ms typical (UPS); 20ms typical (Appliances) | |||||||||
| Waveform | Pure sine wave | |||||||||
| SOLAR CHARGER&AC CHARGER | ||||||||||
| Maximum Solar Charge Current | 100A | |||||||||
| Maximum AC Charge Current | 100A | |||||||||
| Maximum Charge Current | 100A | |||||||||
| Rated Power | 6000W | |||||||||
| Max. PV Circuit Voltage | 500Vdc max | |||||||||
| PV MPPT Volt Range | 120~500Vdc | |||||||||
| Min. Battery Volt for PV Charge | 48Vdc | |||||||||
| OPERATING ENVIRONMENT | ||||||||||
| Storage Temperature | 0°C - 55°C | |||||||||
| Humidity | -15°C - 60°C | |||||||||
| PHYSICAL | ||||||||||
| Dimension | 415 x 320 x 129 | |||||||||
| Net Weight | 13.2KG | |||||||||
Connection Method
Note：
1. Parallel operation in single phase with up to 12 units.
The supported maximum output power is 60KW
2. Maximum 3 units work together to support three-phase equipment.
Four units support one phase maximum.
Why choose US
Our Service Team offers customers an unmatched level of knowledge combined with the skills and experience to turn business challenges into competitive advantages.
RFQ
1. How to choose a suitable inverter?
A:If your load is a resistive load, such as a light bulb, you can choose a commutating inverter. But for inductive and capacitive loads, we recommend pure sine wave inverters.
2. How to choose the size of the inverter?
A:Different types of loads have different power requirements. The size of the inverter can be determined by looking at the load power value.
3. How to calculate the working time of the load and need to configure the battery size?
A:We usually have a formula to calculate it, but it's not 100% accurate, because there are battery boxes too, and old batteries have some wear and tear, so this is just a reference:
Working time=battery capacity*battery voltage*0.8/load power (H=AH*V*0.8/W)
