This solar charge controller is an advanced solar charger with maximum power point tracking. Applying intelligent MPPT algorithm , it allows solar charge controller to extract maximum power from solar arrays by finding the maximum power point of the array.
The MPPT battery charging process has been optimized for long battery life and improved system performance. Self-diagnostics and electronic error protections prevent damage when installation errors or system faults occur. This charger also features multifunctional LCD with communication ports for remote battery temperature and voltage measurement.
Feature
* MPPT 30A/40A/50A/60A solar charge controller
* 100% MPPT technology
* 0 Layer, easy installation, easy setup
* Built-in MCU controller with high performance
* Automatic switch for 12V/24V/48V battery bank
* 3-stage charging optimizes battery performance
* Overcharge protection, Input PV polarity reverse protection, Output limited current protection,Over-temperature protection
* Suitable for battery types such as sealed lead acid, vented gel, and lithium battery, etc
* Easy to be mounted
Data Sheet
MODEL
SCCM3024
SCCM6048
SCCM12048
Maximum Battery Current
30Amps
60Amps
120Amps
Nominal System Voltage
12 ,24VDC(Auto detection)
12V, 24V, 48V DC (Auto detection)
Maximum Solar Input Voltage
95V
145V
195V
PV Start-up Voltage
15V
PV Array MPPT Voltage Range
12VDC / 24VDC
12VDC /2 4 VDC / 48VDC
15-80VDC /30-80VDC
15-130VDC / 30-130VDC
15-170VDC / 30-170VDC
60-130VDC
60-170VDC
Maximum Input Power
12V-420W
12V-825W
12V-1650W
24V-830W
24V-1650W
24V -3300W
48V-3300W
48V - 6600W
Introduction:
Consider the following points before selecting where to install:
•This solar charge controller is designed in IP31 for indoor applications only.
•Do not mount the unit on flammable construction materials.
•Mount on a solid surface
•Install this charger at eye level in order to allow the LCD display to be read at all times.
•For proper air circulation to dissipate heat, allow a clearance of approx. 20 cm to the side and approx. 50 cm above and below the unit.
•The ambient temperature should be between 0°C and 55°C to ensure optimal operation.
•The recommended installation position is to be adhered to the wall vertically.
FAQ
Q1. Would you accept to use our logo?
A: All of our products are accepted to print your logo on the case and box, it depends on the quantity.
Q2. We want to know the monthly capacity.
A: 20000-30000PCS per month.
Q3. Where is your main market?
A: Our main market is North America, Europe and part of the Middle East.
Q4. What kind of certificates do you have?
A: CE certificate.
Q5. How long is the warranty or guarantee?
Answer: 3 year
Q6. How to pay for the solar controller?
A: We accept Paypal, Western Union, T/T. If you have any good payment, we can also accept it.
